dmesg - DISK PERF
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.18.0-kali3-amd64 (debian-kernel@lists.debian.org) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Debian 3.18.6-1~kali2 (2015-03-02)
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000d7eaffff] usable
BIOS-e820: [mem 0x00000000d7eb0000-0x00000000d7ee1fff] ACPI NVS
BIOS-e820: [mem 0x00000000d7ee2000-0x00000000d7eeffff] ACPI data
BIOS-e820: [mem 0x00000000d7ef0000-0x00000000d7efffff] reserved
BIOS-e820: [mem 0x00000000e8000000-0x00000000ebffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x0000000227ffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: Gigabyte Technology Co., Ltd. EP45-UD3P/EP45-UD3P, BIOS F8 02/24/2009
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x228000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CCFFF write-protect
CD000-EFFFF uncachable
F0000-FFFFF write-through
MTRR variable ranges enabled:
0 base 000000000 mask F00000000 write-back
1 base 0E0000000 mask FE0000000 uncachable
2 base 0D8000000 mask FF8000000 uncachable
3 base 100000000 mask F00000000 write-back
4 base 200000000 mask FC0000000 write-back
5 base 230000000 mask FF0000000 uncachable
6 base 228000000 mask FF8000000 uncachable
7 base 0D7F00000 mask FFFF00000 uncachable
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: update [mem 0xd7f00000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xd7eb0 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f57a0-0x000f57af] mapped at [ffff8800000f57a0]
Base memory trampoline at [ffff880000099000] 99000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01b02000, 0x01b02fff] PGTABLE
BRK [0x01b03000, 0x01b03fff] PGTABLE
BRK [0x01b04000, 0x01b04fff] PGTABLE
init_memory_mapping: [mem 0x227e00000-0x227ffffff]
[mem 0x227e00000-0x227ffffff] page 2M
BRK [0x01b05000, 0x01b05fff] PGTABLE
init_memory_mapping: [mem 0x224000000-0x227dfffff]
[mem 0x224000000-0x227dfffff] page 2M
init_memory_mapping: [mem 0x200000000-0x223ffffff]
[mem 0x200000000-0x223ffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xd7eaffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0xd7dfffff] page 2M
[mem 0xd7e00000-0xd7eaffff] page 4k
init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[mem 0x100000000-0x1ffffffff] page 2M
BRK [0x01b06000, 0x01b06fff] PGTABLE
BRK [0x01b07000, 0x01b07fff] PGTABLE
RAMDISK: [mem 0x35a04000-0x36cf9fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F75D0 000014 (v00 GBT )
ACPI: RSDT 0x00000000D7EE2040 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: FACP 0x00000000D7EE20C0 000074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: DSDT 0x00000000D7EE2180 0050A9 (v01 GBT GBTUACPI 00001000 MSFT 0100000C)
ACPI: FACS 0x00000000D7EB0000 000040
ACPI: EUDS 0x00000000D7EE79C0 000500 (v01 GBT 00000000 00000000)
ACPI: HPET 0x00000000D7EE7880 000038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
ACPI: MCFG 0x00000000D7EE7900 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: APIC 0x00000000D7EE7280 000084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: SSDT 0x00000000D7EE87F0 0003AB (v01 PmRef CpuPm 00003000 INTL 20040311)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x0000000227ffffff]
NODE_DATA(0) allocated [mem 0x227ff6000-0x227ff9fff]
[ffffea0000000000-ffffea00079fffff] PMD -> [ffff88021f600000-ffff8802267fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x227ffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009efff]
node 0: [mem 0x00100000-0xd7eaffff]
node 0: [mem 0x100000000-0x227ffffff]
Initmem setup node 0 [mem 0x00001000-0x227ffffff]
On node 0 totalpages: 2096718
DMA zone: 56 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 12036 pages used for memmap
DMA32 zone: 880304 pages, LIFO batch:31
Normal zone: 16576 pages used for memmap
Normal zone: 1212416 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
PM: Registered nosave memory: [mem 0xd7eb0000-0xd7ee1fff]
PM: Registered nosave memory: [mem 0xd7ee2000-0xd7eeffff]
PM: Registered nosave memory: [mem 0xd7ef0000-0xd7efffff]
PM: Registered nosave memory: [mem 0xd7f00000-0xe7ffffff]
PM: Registered nosave memory: [mem 0xe8000000-0xebffffff]
PM: Registered nosave memory: [mem 0xec000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
e820: [mem 0xec000000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff880227c00000 s81856 r8192 d28736 u524288
pcpu-alloc: s81856 r8192 d28736 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 2068029
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x3, cntxt size 0x240 using standard form
AGP: Checking aperture...
AGP: No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 8172536K/8386872K available (5502K kernel code, 966K rwdata, 1860K rodata, 1228K init, 852K bss, 214336K reserved)
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS:33024 nr_irqs:456 0
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2666.639 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5333.27 BogoMIPS (lpj=10666556)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20140926
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
Yama: disabled by default; enable with sysctl kernel.yama.*
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 20K (ffffffff81a26000 - ffffffff81a2b000)
ftrace: allocating 22047 entries in 87 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz (fam: 06, model: 17, stepping: 0a)
Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (21333.11 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xd7eb0000-0xd7ee1fff] (204800 bytes)
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe8000000-0xebffffff] (base 0xe8000000)
PCI: MMCONFIG at [mem 0xe8000000-0xebffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88021EFD5000 00022A (v01 PmRef Cpu0Ist 00003000 INTL 20040311)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88021EFD1200 000152 (v01 PmRef Cpu1Ist 00003000 INTL 20040311)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88021EFD1000 000152 (v01 PmRef Cpu2Ist 00003000 INTL 20040311)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88021E861E00 000152 (v01 PmRef Cpu3Ist 00003000 INTL 20040311)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140926/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140926/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3f]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
pci_bus 0000:00: root bus resource [mem 0xd7f00000-0xfebfffff]
pci 0000:00:00.0: [8086:2e20] type 00 class 0x060000
DMAR: Forcing write-buffer flush capability
DMAR: Disabling IOMMU for graphics on this chipset
pci 0000:00:01.0: [8086:2e21] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 0x20: [io 0xe000-0xe01f]
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 0x20: [io 0xe100-0xe11f]
pci 0000:00:1a.1: System wakeup disabled by ACPI
pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300
pci 0000:00:1a.2: reg 0x20: [io 0xe200-0xe21f]
pci 0000:00:1a.2: System wakeup disabled by ACPI
pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 0x10: [mem 0xf1405000-0xf14053ff]
pci 0000:00:1a.7: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf1400000-0xf1403fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:3a46] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:3a48] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1c.5: [8086:3a4a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0xe300-0xe31f]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0xe400-0xe41f]
pci 0000:00:1d.1: System wakeup disabled by ACPI
pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0xe500-0xe51f]
pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xf1404000-0xf14043ff]
pci 0000:00:1d.7: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100
pci 0000:00:1f.0: can't claim BAR 13 [io 0x0400-0x047f]: address conflict with ACPI CPU throttle [io 0x0410-0x0415]
pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 000b)
pci 0000:00:1f.2: [8086:3a20] type 00 class 0x01018a
pci 0000:00:1f.2: reg 0x10: [io 0x0000-0x0007]
pci 0000:00:1f.2: reg 0x14: [io 0x0000-0x0003]
pci 0000:00:1f.2: reg 0x18: [io 0x0000-0x0007]
pci 0000:00:1f.2: reg 0x1c: [io 0x0000-0x0003]
pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf00f]
pci 0000:00:1f.2: reg 0x24: [io 0xf100-0xf10f]
pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io 0x0376]
pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf1406000-0xf14060ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x0500-0x051f]
pci 0000:00:1f.5: [8086:3a26] type 00 class 0x010185
pci 0000:00:1f.5: reg 0x10: [io 0xe700-0xe707]
pci 0000:00:1f.5: reg 0x14: [io 0xe800-0xe803]
pci 0000:00:1f.5: reg 0x18: [io 0xe900-0xe907]
pci 0000:00:1f.5: reg 0x1c: [io 0xea00-0xea03]
pci 0000:00:1f.5: reg 0x20: [io 0xeb00-0xeb0f]
pci 0000:00:1f.5: reg 0x24: [io 0xec00-0xec0f]
pci 0000:01:00.0: [10de:0de4] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xec000000-0xecffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xd8000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xe0000000-0xe1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xa000-0xa07f]
pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
pci 0000:01:00.1: [10de:0bea] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xee000000-0xee003fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xa000-0xafff]
pci 0000:00:01.0: bridge window [mem 0xec000000-0xeeffffff]
pci 0000:00:01.0: bridge window [mem 0xd8000000-0xe7ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [197b:2363] type 00 class 0x010185
pci 0000:03:00.0: reg 0x24: [mem 0xf1100000-0xf1101fff]
pci 0000:03:00.0: PME# supported from D3hot
pci 0000:03:00.1: [197b:2363] type 00 class 0x010185
pci 0000:03:00.1: reg 0x10: [io 0xb000-0xb007]
pci 0000:03:00.1: reg 0x14: [io 0xb100-0xb103]
pci 0000:03:00.1: reg 0x18: [io 0xb200-0xb207]
pci 0000:03:00.1: reg 0x1c: [io 0xb300-0xb303]
pci 0000:03:00.1: reg 0x20: [io 0xb400-0xb40f]
pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.3: PCI bridge to [bus 03]
pci 0000:00:1c.3: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.3: bridge window [mem 0xf1100000-0xf11fffff]
pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:04:00.0: reg 0x10: [io 0xc000-0xc0ff]
pci 0000:04:00.0: reg 0x18: [mem 0xf1010000-0xf1010fff 64bit pref]
pci 0000:04:00.0: reg 0x20: [mem 0xf1000000-0xf100ffff 64bit pref]
pci 0000:04:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.4: PCI bridge to [bus 04]
pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.4: bridge window [mem 0xef000000-0xefffffff]
pci 0000:00:1c.4: bridge window [mem 0xf1000000-0xf10fffff 64bit pref]
pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:05:00.0: reg 0x10: [io 0xd000-0xd0ff]
pci 0000:05:00.0: reg 0x18: [mem 0xf1210000-0xf1210fff 64bit pref]
pci 0000:05:00.0: reg 0x20: [mem 0xf1200000-0xf120ffff 64bit pref]
pci 0000:05:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.5: PCI bridge to [bus 05]
pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.5: bridge window [mem 0xf0000000-0xf0ffffff]
pci 0000:00:1c.5: bridge window [mem 0xf1200000-0xf12fffff 64bit pref]
pci 0000:06:07.0: [104c:8024] type 00 class 0x0c0010
pci 0000:06:07.0: reg 0x10: [mem 0xf1304000-0xf13047ff]
pci 0000:06:07.0: reg 0x14: [mem 0xf1300000-0xf1303fff]
pci 0000:06:07.0: supports D1 D2
pci 0000:06:07.0: PME# supported from D0 D1 D2 D3hot
pci 0000:00:1e.0: PCI bridge to [bus 06] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xf1300000-0xf13fffff]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xd7f00000-0xfebfffff] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
ACPI: Enabled 1 GPEs in block 00 to 3F
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
e820: reserve RAM buffer [mem 0xd7eb0000-0xd7ffffff]
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
pnp: PnP ACPI init
system 00:00: [io 0x04d0-0x04d1] has been reserved
system 00:00: [io 0x0290-0x029f] has been reserved
system 00:00: [io 0x0800-0x0805] has been reserved
system 00:00: [io 0x0290-0x0294] has been reserved
system 00:00: [io 0x0880-0x088f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: [dma 2]
pnp 00:02: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
system 00:05: [io 0x0400-0x04cf] could not be reserved
system 00:05: [io 0x04d2-0x04ff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [mem 0xe8000000-0xebffffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0x000cda00-0x000cffff] has been reserved
system 00:07: [mem 0x000f0000-0x000f7fff] could not be reserved
system 00:07: [mem 0x000f8000-0x000fbfff] could not be reserved
system 00:07: [mem 0x000fc000-0x000fffff] could not be reserved
system 00:07: [mem 0xd7eb0000-0xd7efffff] could not be reserved
system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:07: [mem 0x00100000-0xd7eaffff] could not be reserved
system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:07: [mem 0xfed10000-0xfed1dfff] has been reserved
system 00:07: [mem 0xfed20000-0xfed8ffff] could not be reserved
system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:07: [mem 0xffb00000-0xffb7ffff] has been reserved
system 00:07: [mem 0xfff00000-0xffffffff] has been reserved
system 00:07: [mem 0x000e0000-0x000effff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 8 devices
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
pci 0000:00:1f.0: BAR 13: [io 0x0400-0x047f] has bogus alignment
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 14: assigned [mem 0xf1500000-0xf16fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xf1700000-0xf18fffff 64bit pref]
pci 0000:00:1c.3: BAR 15: assigned [mem 0xf1900000-0xf1afffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:01:00.0: BAR 6: assigned [mem 0xed000000-0xed07ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xa000-0xafff]
pci 0000:00:01.0: bridge window [mem 0xec000000-0xeeffffff]
pci 0000:00:01.0: bridge window [mem 0xd8000000-0xe7ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.0: bridge window [mem 0xf1500000-0xf16fffff]
pci 0000:00:1c.0: bridge window [mem 0xf1700000-0xf18fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 03]
pci 0000:00:1c.3: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.3: bridge window [mem 0xf1100000-0xf11fffff]
pci 0000:00:1c.3: bridge window [mem 0xf1900000-0xf1afffff 64bit pref]
pci 0000:04:00.0: BAR 6: assigned [mem 0xef000000-0xef00ffff pref]
pci 0000:00:1c.4: PCI bridge to [bus 04]
pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.4: bridge window [mem 0xef000000-0xefffffff]
pci 0000:00:1c.4: bridge window [mem 0xf1000000-0xf10fffff 64bit pref]
pci 0000:05:00.0: BAR 6: assigned [mem 0xf0000000-0xf000ffff pref]
pci 0000:00:1c.5: PCI bridge to [bus 05]
pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.5: bridge window [mem 0xf0000000-0xf0ffffff]
pci 0000:00:1c.5: bridge window [mem 0xf1200000-0xf12fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 06]
pci 0000:00:1e.0: bridge window [mem 0xf1300000-0xf13fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:00: resource 9 [mem 0xd7f00000-0xfebfffff]
pci_bus 0000:01: resource 0 [io 0xa000-0xafff]
pci_bus 0000:01: resource 1 [mem 0xec000000-0xeeffffff]
pci_bus 0000:01: resource 2 [mem 0xd8000000-0xe7ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:02: resource 1 [mem 0xf1500000-0xf16fffff]
pci_bus 0000:02: resource 2 [mem 0xf1700000-0xf18fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:03: resource 1 [mem 0xf1100000-0xf11fffff]
pci_bus 0000:03: resource 2 [mem 0xf1900000-0xf1afffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:04: resource 1 [mem 0xef000000-0xefffffff]
pci_bus 0000:04: resource 2 [mem 0xf1000000-0xf10fffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:05: resource 1 [mem 0xf0000000-0xf0ffffff]
pci_bus 0000:05: resource 2 [mem 0xf1200000-0xf12fffff 64bit pref]
pci_bus 0000:06: resource 1 [mem 0xf1300000-0xf13fffff]
pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:06: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:06: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:06: resource 8 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:06: resource 9 [mem 0xd7f00000-0xfebfffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM
PCI: CLS 32 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 19416K (ffff880035a04000 - ffff880036cfa000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xd3eb0000-0xd7eb0000] (64MB) mapped at [ffff8800d3eb0000-ffff8800d7eaffff]
microcode: CPU0 sig=0x1067a, pf=0x10, revision=0xa07
microcode: CPU1 sig=0x1067a, pf=0x10, revision=0xa07
microcode: CPU2 sig=0x1067a, pf=0x10, revision=0xa07
microcode: CPU3 sig=0x1067a, pf=0x10, revision=0xa07
microcode: Microcode Update Driver: v2.00 , Peter Oruba
futex hash table entries: 1024 (order: 4, 65536 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1431033672.552:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 15999
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
pcieport 0000:00:1c.3: irq 26 for MSI/MSI-X
pcieport 0000:00:1c.4: irq 27 for MSI/MSI-X
pcieport 0000:00:1c.5: irq 28 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: does not run on family 6 model 23
GHES: HEST is not enabled!
00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
i8042: PNP: No PS/2 controller found. Probing ports directly.
i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
i8042: If AUX port is really absent please use the 'i8042.noaux' option
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
ledtrig-cpu: registered to indicate activity on CPUs
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
TCP: cubic registered
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
mpls_gso: MPLS GSO support
registered taskstats version 1
rtc_cmos 00:01: setting system clock to 2015-05-07 21:21:13 UTC (1431033673)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1228K (ffffffff818f3000 - ffffffff81a26000)
Write protecting the kernel read-only data: 8192k
Freeing unused kernel memory: 632K (ffff880001562000 - ffff880001600000)
Freeing unused kernel memory: 188K (ffff8800017d1000 - ffff880001800000)
udevd[77]: starting version 175
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1a.0: detected 2 ports
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e000
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 3.18.0-kali3-amd64 uhci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
ehci-pci: EHCI PCI platform driver
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1a.1: detected 2 ports
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e100
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 3.18.0-kali3-amd64 uhci_hcd
usb usb2: SerialNumber: 0000:00:1a.1
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.2: detected 2 ports
uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000e200
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.18.0-kali3-amd64 uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e300
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.18.0-kali3-amd64 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e400
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.18.0-kali3-amd64 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.1
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e500
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 3.18.0-kali3-amd64 uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.2
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ehci-pci 0000:00:1a.7: EHCI Host Controller
ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 7
SCSI subsystem initialized
ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
ehci-pci 0000:00:1a.7: irq 18, io mem 0xf1405000
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:04:00.0: irq 29 for MSI/MSI-X
r8169 0000:04:00.0 eth0: RTL8168c/8111c at 0xffffc90004e36000, 00:1f:d0:d5:06:68, XID 1c4000c0 IRQ 29
r8169 0000:04:00.0 eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:05:00.0: irq 30 for MSI/MSI-X
r8169 0000:05:00.0 eth1: RTL8168c/8111c at 0xffffc90004e5e000, 00:1f:d0:81:1f:78, XID 1c4000c0 IRQ 30
r8169 0000:05:00.0 eth1: jumbo features [frames: 6128 bytes, tx checksumming: ko]
ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
libata version 3.00 loaded.
usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: EHCI Host Controller
usb usb7: Manufacturer: Linux 3.18.0-kali3-amd64 ehci_hcd
usb usb7: SerialNumber: 0000:00:1a.7
pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 6 ports detected
scsi host0: pata_jmicron
scsi host1: pata_jmicron
ata1: PATA max UDMA/100 cmd 0xb000 ctl 0xb100 bmdma 0xb400 irq 16
ata2: PATA max UDMA/100 cmd 0xb200 ctl 0xb300 bmdma 0xb408 irq 16
ahci 0000:03:00.0: version 3.0
ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
scsi host2: ahci
scsi host3: ahci
ata3: SATA max UDMA/133 abar m8192@0xf1100000 port 0xf1100100 irq 19
ata4: SATA max UDMA/133 abar m8192@0xf1100000 port 0xf1100180 irq 19
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
firewire_ohci 0000:06:07.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 8
ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0xf1404000
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: EHCI Host Controller
usb usb8: Manufacturer: Linux 3.18.0-kali3-amd64 ehci_hcd
usb usb8: SerialNumber: 0000:00:1d.7
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 6 ports detected
Floppy drive(s): fd0 is 1.44M
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
FDC 0 is a post-1991 82077
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
scsi host4: ata_piix
scsi host5: ata_piix
ata5: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
ata6: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
scsi host6: ata_piix
scsi host7: ata_piix
ata7: SATA max UDMA/133 cmd 0xe700 ctl 0xe800 bmdma 0xeb00 irq 19
ata8: SATA max UDMA/133 cmd 0xe900 ctl 0xea00 bmdma 0xeb08 irq 19
ata4: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
usb 8-6: new high-speed USB device number 2 using ehci-pci
ata7: SATA link down (SStatus 0 SControl 300)
usb 8-6: New USB device found, idVendor=05e3, idProduct=0608
usb 8-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 8-6: Product: USB2.0 Hub
hub 8-6:1.0: USB hub found
hub 8-6:1.0: 4 ports detected
tsc: Refined TSC clocksource calibration: 2666.363 MHz
firewire_core 0000:06:07.0: created device fw0: GUID 00ee4e2000001fd0, S400
ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata8.00: HPA detected: current 3907027055, native 3907029168
ata8.00: ATA-9: WDC WD20EURX-63T0FY0, 80.00A80, max UDMA/133
ata8.00: 3907027055 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata8.00: configured for UDMA/133
ata6.00: SATA link down (SStatus 0 SControl 300)
ata6.01: SATA link down (SStatus 0 SControl 300)
usb 8-6.1: new low-speed USB device number 3 using ehci-pci
usb 8-6.1: New USB device found, idVendor=046d, idProduct=c312
usb 8-6.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 8-6.1: Product: USB Multimedia Keyboard
usb 8-6.1: Manufacturer: BTC
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1d.7/usb8/8-6/8-6.1/8-6.1:1.0/0003:046D:C312.0001/input/input1
hid-generic 0003:046D:C312.0001: input,hidraw0: USB HID v1.10 Keyboard [BTC USB Multimedia Keyboard] on usb-0000:00:1d.7-6.1/input0
input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1d.7/usb8/8-6/8-6.1/8-6.1:1.1/0003:046D:C312.0002/input/input2
hid-generic 0003:046D:C312.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [BTC USB Multimedia Keyboard] on usb-0000:00:1d.7-6.1/input1
ata5.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.01: SATA link down (SStatus 0 SControl 300)
ata5.00: supports DRM functions and may not be fully accessible
ata5.00: ATA-9: Samsung SSD 840 EVO 120GB, EXT0BB6Q, max UDMA/133
ata5.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 0/32)
ata5.00: supports DRM functions and may not be fully accessible
ata5.00: configured for UDMA/133
usb 8-6.3: new low-speed USB device number 4 using ehci-pci
scsi 4:0:0:0: Direct-Access ATA Samsung SSD 840 BB6Q PQ: 0 ANSI: 5
scsi 7:0:0:0: Direct-Access ATA WDC WD20EURX-63T 0A80 PQ: 0 ANSI: 5
sd 4:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 7:0:0:0: [sdb] 3907027055 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 7:0:0:0: [sdb] 4096-byte physical blocks
sd 7:0:0:0: [sdb] Write Protect is off
sd 7:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda4 < sda5 sda6 >
sd 4:0:0:0: [sda] Attached SCSI disk
sd 4:0:0:0: Attached scsi generic sg0 type 0
sd 7:0:0:0: Attached scsi generic sg1 type 0
sdb: sdb1 sdb2
sd 7:0:0:0: [sdb] Attached SCSI disk
usb 8-6.3: New USB device found, idVendor=09da, idProduct=c10a
usb 8-6.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 8-6.3: Product: USB Mouse
usb 8-6.3: Manufacturer: A4Tech
input: A4Tech USB Mouse as /devices/pci0000:00/0000:00:1d.7/usb8/8-6/8-6.3/8-6.3:1.0/0003:09DA:C10A.0003/input/input3
hid-generic 0003:09DA:C10A.0003: input,hiddev0,hidraw2: USB HID v1.10 Mouse [A4Tech USB Mouse] on usb-0000:00:1d.7-6.3/input0
platform microcode: firmware: direct-loading firmware intel-ucode/06-17-0a
microcode: CPU0 sig=0x1067a, pf=0x10, revision=0xa07
microcode: CPU0 updated to revision 0xa0b, date = 2010-09-28
platform microcode: firmware: direct-loading firmware intel-ucode/06-17-0a
microcode: CPU1 sig=0x1067a, pf=0x10, revision=0xa07
microcode: CPU1 updated to revision 0xa0b, date = 2010-09-28
platform microcode: firmware: direct-loading firmware intel-ucode/06-17-0a
microcode: CPU2 sig=0x1067a, pf=0x10, revision=0xa07
microcode: CPU2 updated to revision 0xa0b, date = 2010-09-28
platform microcode: firmware: direct-loading firmware intel-ucode/06-17-0a
microcode: CPU3 sig=0x1067a, pf=0x10, revision=0xa07
microcode: CPU3 updated to revision 0xa0b, date = 2010-09-28
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: dm-devel@redhat.com
PM: Starting manual resume from disk
PM: Hibernation image partition 8:5 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
EXT4-fs (sda6): INFO: recovery required on readonly filesystem
EXT4-fs (sda6): write access will be enabled during recovery
Switched to clocksource tsc
EXT4-fs (sda6): recovery complete
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
udevd[455]: starting version 175
tsc: Marking TSC unstable due to TSC halts in idle
ACPI: acpi_idle registered with cpuidle
Switched to clocksource hpet
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
ACPI: Power Button [PWRF]
[drm] Initialized drm 1.1.0 20060810
parport_pc 00:04: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 340.65 Tue Dec 2 09:50:34 PST 2014
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x000000000000042c-0x000000000000042d (\GP2C) (20140926/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
r8169 0000:05:00.0 eth3: renamed from eth1
r8169 0000:04:00.0 eth4: renamed from eth0
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
snd_hda_intel 0000:00:1b.0: irq 31 for MSI/MSI-X
sound hdaudioC0D2: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
sound hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
sound hdaudioC0D2: mono: mono_out=0x0
sound hdaudioC0D2: dig-out=0x1e/0x0
sound hdaudioC0D2: inputs:
sound hdaudioC0D2: Front Mic=0x19
sound hdaudioC0D2: Rear Mic=0x18
sound hdaudioC0D2: Line=0x1a
sound hdaudioC0D2: dig-in=0x1f
input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
random: alsactl urandom read with 108 bits of entropy available
random: nonblocking pool is initialized
Adding 4789244k swap on /dev/sda5. Priority:-1 extents:1 across:4789244k SSFS
EXT4-fs (sda6): re-mounted. Opts: (null)
EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
loop: module loaded
it87: Found IT8718F chip at 0x290, revision 5
it87: VID is disabled (pins used for GPIO)
it87: Beeping is supported
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
r8169 0000:05:00.0 eth3: link down
IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready
r8169 0000:05:00.0 eth3: link down
PPP generic driver version 2.4.2
Netfilter messages via NETLINK v0.30.
/dev/vmmon[2740]: Module vmmon: registered with major=10 minor=165
/dev/vmmon[2740]: Module vmmon: initialized
Guest personality initialized and is inactive
VMCI host device registered (name=vmci, major=10, minor=58)
Initialized host personality
NET: Registered protocol family 40
fuse init (API version 7.23)
nvidia 0000:01:00.0: irq 32 for MSI/MSI-X
r8169 0000:05:00.0 eth3: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth3: link becomes ready
/dev/vmnet: open called by PID 2944 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-eth3: up
bridge-eth3: attached
/dev/vmnet: open called by PID 2964 (vmnet-netifup)
/dev/vmnet: hub 1 does not exist, allocating memory.
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 2968 (vmnet-dhcpd)
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 2978 (vmnet-natd)
/dev/vmnet: hub 8 does not exist, allocating memory.
/dev/vmnet: port on hub 8 successfully opened
userif-3: sent link down event.
userif-3: sent link up event.
/dev/vmnet: open called by PID 2979 (vmnet-netifup)
/dev/vmnet: port on hub 8 successfully opened
/dev/vmnet: open called by PID 2982 (vmnet-dhcpd)
/dev/vmnet: port on hub 8 successfully opened
------------[ cut here ]------------
WARNING: CPU: 2 PID: 2937 at /build/linux-H6_NPX/linux-3.18.6/drivers/gpu/drm/drm_ioctl.c:143 drm_setversion+0x17e/0x190 [drm]()
No drm_driver.set_busid() implementation provided by nvidia_frontend_exit_module [nvidia]. Use drm_dev_set_unique() to set the unique name explicitly.
Modules linked in: vmnet(O) fuse vmw_vsock_vmci_transport vsock vmw_vmci nfnetlink_log vmmon(O) nfnetlink binfmt_misc ppp_generic slhc it87 hwmon_vid loop dm_crypt snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic joydev coretemp kvm_intel snd_hda_intel snd_hda_controller snd_hda_codec kvm snd_hwdep iTCO_wdt iTCO_vendor_support evdev lpc_ich mfd_core snd_pcm nvidia(PO) i2c_i801 serio_raw parport_pc 8250_fintek tpm_infineon tpm_tis tpm parport snd_seq snd_seq_device snd_timer snd drm soundcore i2c_core button acpi_cpufreq processor thermal_sys ext4 crc16 mbcache jbd2 dm_mod sg sd_mod hid_generic ata_generic usbhid hid floppy firewire_ohci ahci pata_jmicron ata_piix libahci firewire_core crc_itu_t r8169 mii libata scsi_mod ehci_pci uhci_hcd ehci_hcd usbcore usb_common
CPU: 2 PID: 2937 Comm: Xorg Tainted: P O 3.18.0-kali3-amd64 #1 Debian 3.18.6-1~kali2
Hardware name: Gigabyte Technology Co., Ltd. EP45-UD3P/EP45-UD3P, BIOS F8 02/24/2009
0000000000000000 0000000000000009 ffffffff81554a5e ffff8800d20b3d28
ffffffff8106db8b ffff8800d20b3e00 ffff88021c254800 ffff88021c39e7c0
ffff88021c254800 ffff88021c735000 ffffffff8106dc7a ffffffffa02bb530
Call Trace:
[] ? dump_stack+0x41/0x51
[] ? warn_slowpath_common+0x8b/0xc0
[] ? warn_slowpath_fmt+0x4a/0x50
[] ? drm_setversion+0x17e/0x190 [drm]
[] ? drm_ioctl+0x343/0x610 [drm]
[] ? drm_noop+0x30/0x30 [drm]
[] ? fsnotify+0x335/0x4b0
[] ? new_sync_write+0x74/0xa0
[] ? do_vfs_ioctl+0x83/0x500
[] ? __sb_end_write+0x2d/0x70
[] ? vfs_write+0x186/0x200
[] ? SyS_ioctl+0xa1/0xc0
[] ? system_call_fast_compare_end+0xc/0x11
---[ end trace ca83cc41555fc8ee ]---
------------[ cut here ]------------
WARNING: CPU: 2 PID: 2937 at /build/linux-H6_NPX/linux-3.18.6/drivers/gpu/drm/drm_ioctl.c:143 drm_setversion+0x17e/0x190 [drm]()
No drm_driver.set_busid() implementation provided by nvidia_frontend_exit_module [nvidia]. Use drm_dev_set_unique() to set the unique name explicitly.
Modules linked in: vmnet(O) fuse vmw_vsock_vmci_transport vsock vmw_vmci nfnetlink_log vmmon(O) nfnetlink binfmt_misc ppp_generic slhc it87 hwmon_vid loop dm_crypt snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic joydev coretemp kvm_intel snd_hda_intel snd_hda_controller snd_hda_codec kvm snd_hwdep iTCO_wdt iTCO_vendor_support evdev lpc_ich mfd_core snd_pcm nvidia(PO) i2c_i801 serio_raw parport_pc 8250_fintek tpm_infineon tpm_tis tpm parport snd_seq snd_seq_device snd_timer snd drm soundcore i2c_core button acpi_cpufreq processor thermal_sys ext4 crc16 mbcache jbd2 dm_mod sg sd_mod hid_generic ata_generic usbhid hid floppy firewire_ohci ahci pata_jmicron ata_piix libahci firewire_core crc_itu_t r8169 mii libata scsi_mod ehci_pci uhci_hcd ehci_hcd usbcore usb_common
CPU: 2 PID: 2937 Comm: Xorg Tainted: P W O 3.18.0-kali3-amd64 #1 Debian 3.18.6-1~kali2
Hardware name: Gigabyte Technology Co., Ltd. EP45-UD3P/EP45-UD3P, BIOS F8 02/24/2009
0000000000000000 0000000000000009 ffffffff81554a5e ffff8800d20b3d28
ffffffff8106db8b ffff8800d20b3e00 ffff88021c254800 ffff88021c39e7c0
ffff88021c254800 ffff88021c735000 ffffffff8106dc7a ffffffffa02bb530
Call Trace:
[] ? dump_stack+0x41/0x51
[] ? warn_slowpath_common+0x8b/0xc0
[] ? warn_slowpath_fmt+0x4a/0x50
[] ? drm_setversion+0x17e/0x190 [drm]
[] ? drm_ioctl+0x343/0x610 [drm]
[] ? drm_noop+0x30/0x30 [drm]
[] ? fsnotify+0x335/0x4b0
[] ? new_sync_write+0x74/0xa0
[] ? do_vfs_ioctl+0x83/0x500
[] ? __sb_end_write+0x2d/0x70
[] ? vfs_write+0x186/0x200
[] ? SyS_ioctl+0xa1/0xc0
[] ? system_call_fast_compare_end+0xc/0x11
---[ end trace ca83cc41555fc8ef ]---
r8169 0000:04:00.0 eth4: link down
IPv6: ADDRCONF(NETDEV_UP): eth4: link is not ready
userif-3: sent link down event.
userif-3: sent link up event.
device eth3 entered promiscuous mode
device eth3 left promiscuous mode
device eth3 entered promiscuous mode
device eth3 left promiscuous mode
device eth3 entered promiscuous mode
device eth3 left promiscuous mode
device eth3 entered promiscuous mode
device eth3 left promiscuous mode
perf interrupt took too long (2507 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
perf interrupt took too long (5006 > 5000), lowering kernel.perf_event_max_sample_rate to 25000